Skip to main content
Packing Terminal

Packing Terminal Settings

Set up printers, Packeye, packing rules and returns put-away on each Helm WMS Packing Terminal.

Opening Settings

Settings are saved on the terminal itself, not against the person signed in. Each packing bench keeps its own printers, packing rules and returns setup, so a bench by the courier collection point can work differently from one in the returns area.

  1. Select your name in the top-left corner to open the user menu.

  2. Choose Settings. The panes are listed down the left under three groups: General Settings, Despatch Settings and Returns Settings.

  3. Make your changes in as many panes as you need, then select Save. A Changes Saved message confirms it.

  4. To leave without saving, select Cancel. If anything changed, the terminal asks Close without saving?: choose Discard changes or Keep editing.

Note: Settings only appears in the user menu while Supervisor Mode is on. Owners and admins see it straight away. Anyone else turns on Supervisor Mode in the same menu and a supervisor signs in.

Tip: Settings that need more explaining have a short link underneath them, such as What Packeye is. Select it for a plain-English explanation without leaving the pane.

Printer

Every document the terminal prints, from courier labels to packing slips, goes to the printer assigned to its paper size. Set this pane up first: until a printer is assigned, labels have nowhere to go and the home screen shows a printer warning.

Setting

What it does

Use the company's printers

Takes the printers and their print settings from your company settings in Helm instead of this pane.

Default paper size

Used when a print job does not choose a size itself: A4, A5, 6×4 label, 4×4 label, 8×4 label or S19.

Default to colour

Prints in colour unless the job says otherwise.

Default to single-sided

Prints on one side unless the job says otherwise.

6×4 label printer to S19 printer

One row per paper size. Choose the printer for each size you use, or leave it on This computer's default, then select Test beside the row to print a test page on that printer.

Note: You can open this pane before anyone signs in. Right-click the Packing Terminal icon in the system tray and choose Printer Settings, or select Printer settings on the Choose your terminal screen.

Tip: Helm can print to this bench too. While the terminal is running and signed in, documents and labels sent to it from Helm print on the printer matched to their size.

Packeye

Packeye films the bench with a webcam while an order is packed and saves the video against that order. If a customer says an item was missing or damaged, the video shows exactly what went in the box. It films the bench, not the packer.

Setting

What it does

Turn on Packeye

Starts filming the bench while orders are packed.

Camera

The webcam that films the bench.

Maximum video length

From 1 to 10 minutes, with quick picks of 1, 3, 5 and 10. Recording stops at this length even if the pack is not finished.

Stop when nothing moves

Disabled, 15 seconds, 30 seconds, 60 seconds or 90 seconds. The video stops once the bench has been still this long, and any movement starts the countdown again. Choose Disabled to record every video for the full length.

Keep videos for

How long videos are kept: 14 days, 30 days, 45 days, 2 months, 6 months or 1 year.

Save videos to

A folder on this computer. Videos are saved here first, then sent to the company's storage.

Tip: Stop when nothing moves keeps videos short on quick packs without cutting off a slow one. 30 seconds suits most benches.

What Packeye Needs

  • A webcam: any standard webcam connected to the computer that runs the Packing Terminal. There is no minimum resolution or frame rate; the computer only needs to recognise the camera so you can choose it under Camera.

  • Free disk space: videos are saved to the folder in Save videos to first, then sent to your company's storage.

  • An internet connection: so each finished video can be uploaded and saved against its order.

Tip: Mount the camera above the bench, pointing down, so it sees the whole packing area and every item going into the box.

Terminal

Setting

What it does

Auto-logout when idle

Signs the packer out when the terminal sits unused.

Log out after

15 minutes, 30 minutes, 45 minutes or 60 minutes. Appears once auto-logout is on. Any scan, key press or mouse movement restarts the countdown.

Scan sounds

A short chime when a scan is accepted and a low double buzz when it is refused.

Scan sound volume

From 10% to 100%. Appears once scan sounds are on.

Heads up: If auto-logout signs someone out partway through an order, that order has to be started again. Choose a time longer than your slowest packs.

Sandbox

Sandbox (practice mode) adds a Sandbox switch to the top bar. Nothing changes until someone turns that switch on. While it is on, an orange border runs round the screen, nothing reaches the live system, orders and despatches are practice only, and labels print as test pages. It switches itself off when the user logs out.

Tip: Turn Sandbox on for a new packer's first shift. They can work through real-looking orders without creating a single shipment.

Process

The Process pane under Despatch controls how an order moves through the bench, from checking items to the final despatch.

Setting

What it does

Product check

How the packer proves the right items are in the box. Visual: checked on screen by eye. Barcode: every item has to be scanned, so a wrong item cannot get through. Auto-skip: no check, straight to the parcels.

Allow product search

Lets the home screen search box find products as well as orders.

Auto-despatch

Never, Tagged orders only, Untagged orders only or Every order. An auto-despatched order completes itself as soon as it is ready: the label is created and the order despatched without the packer confirming anything.

Auto-despatch tags

The order tags the setting above looks for, such as "wholesale". Appears for Tagged orders only and Untagged orders only.

Parcel allocation

How items start off on the parcel screen: No allocation, All items in parcel 1, Split across 2 parcels or Rule based, which works out the number of parcels from limits you set, such as a maximum weight per parcel. The packer can always add parcels and move items.

Packing instructions

How special instructions such as "gift wrap" appear: Pop-up (shown when the order opens and has to be dismissed), Side panel or Hidden.

Mark finished orders as

Despatched, the normal choice, or Packing to leave the order part-done for a later step such as loading.

Require size and weight before despatch

An order cannot be despatched until every parcel has a size and a weight. A saved package type or measurements typed in by hand both count as a size.

Courier confirmation screen

A last look at the parcels and courier before the label is created. With this off, one press despatches straight away.

Show today's despatched orders

A list on the home screen with a reprint button on each order.

Show order comments and tags

Shows them in the sidebar on the packing screen.

Allow address change

When off, changing a delivery address at the bench needs a supervisor sign-in.

Allow shipping service change

When off, the shipping service is locked unless a supervisor signs in.

Heads up: With Auto-despatch set to Every order, no packer confirms anything before the label is created. Use tags to limit it to orders you trust, such as single-item orders in a standard box.

Note: Only choose Packing under Mark finished orders as if something else in your process marks those orders as despatched later.

Auto-Print

Setting

What it does

Return to the main screen after despatch

Skips the order shipped screen. The terminal stays on it if a print failed, so the problem can be seen.

Packing slip

Prints a packing slip automatically when the order is despatched.

Invoice

Prints an invoice automatically when the order is despatched.

Commercial invoice

Prints customs paperwork for orders going abroad.

Countries

Appears once Commercial invoice is on. Choose the countries that get one, or leave the list empty and every order going abroad gets one.

Put-Away

Put-away is what happens to returned goods after they are booked in: where they go and how they get there. Choose a Returns method first, and the settings that belong to it appear underneath.

Setting

What it does

Returns method

Direct to location: the operator puts each return on a shelf there and then, so it is back on sale straight away. Single movement: returns are dropped at one collection point and a job is raised for the put-away team. Multiple movements: the same, split across several movement jobs so different returns can go to different areas.

Put returns away to

Direct to location only. Storage sends items back to a picking shelf, and the terminal suggests one that already holds the product. Returns sends everything to the returns area to be checked first.

Return location

Direct to location only. This terminal's own returns location, suggested for every return. Leave it blank to use the warehouse's setting.

Who picks the location

Direct to location only. The terminal fills in the return location and the operator confirms it; The operator decides and scans the location they used. The terminal option needs a return location.

Limit items at the return location

Direct to location only. How many units the return location holds before it counts as full. Switched off, there is no limit.

Overflow location

Where units go once the return location is full. Type the code exactly as it appears in Helm, for example RET-OVER-01.

Collection location

Single movement only. Where operators drop returns for the put-away team. The movement job is raised against this location.

Fallback collection location

Multiple movements only. For returns that match none of the movement jobs.

Max lines per movement

Single movement and Multiple movements. Returns keep joining the same movement until it holds this many product lines, then a new one starts. At 0, every return gets its own movement.

Note: The Put-Away pane only appears for warehouses that use locations. In a basic stock warehouse, returns are completed straight after inspection with no put-away step.

Return Preferences

Setting

What it does

Mark items restockable by default

Starts every return line as fit to go back on the shelf. The operator can still change it on each line.

Check returned items by

Visual: the operator counts each item by scanning it or setting its quantity on screen. Barcode scan: an item only counts when its barcode is scanned. If a barcode is missing or damaged, a supervisor can sign in to count by hand, and the terminal records who did.

Tick every item by default

Off, the normal setting, starts every line unticked and each scan counts one unit. On starts every line ticked at its full quantity, for sites where whole orders usually come back. Hidden when checking by barcode scan.

Supervisor needed after

Returns older than this many days need a supervisor sign-in. Set it to 0 to ask every time.

Supervisor Override

Supervisor mode makes everyone using this terminal count as a supervisor, so late returns are accepted without a supervisor signing in. Leave it off, the normal setting, to keep the sign-in for late returns.

Warning: Only turn on Supervisor mode on a terminal that only supervisors can reach. Anyone at that bench can then accept a late return.

Copying Settings to Another Terminal

Once one bench is set up the way you want, copy it rather than setting up the next one by hand.

  1. On the finished terminal, open Settings and under Transfer settings select Export…. Save the file somewhere the other computer can reach.

  2. On the new terminal, open Settings and select Import….

  3. At Import settings?, select Choose file and import and pick the file. A Settings imported. message confirms it.

  4. Check the Printer pane. The printers on a new bench often have different names, so reassign any that do not match.

Resetting a Terminal

A factory reset puts every setting back to its default, deletes the saved sign-in details and signs you out. Orders and shipments already sent are not affected.

  1. Open Settings and, under Factory reset, select Reset this terminal.

  2. At Reset this terminal to factory settings?, select Continue.

  3. Select Reset terminal now to confirm.

  4. Sign in again with Log in with browser. The PIN keypad returns after that first browser sign-in.

Warning: A factory reset cannot be undone. Export the settings first if there is any chance you will want them back.

FAQ

Settings only appears in Supervisor Mode. Turn on Supervisor Mode in the user menu and have a supervisor sign in, or sign in as an owner or admin.

No. Settings are saved on each terminal. Use Export… and Import… under Transfer settings to copy them across.

Open Settings. The company name is shown at the bottom of the sidebar.

Your warehouse does not use locations, so there is nothing to put away to. Returns are completed straight after inspection.

Check you selected Save before closing the window and saw the Changes Saved message. Settings that depend on another one, such as Log out after, only appear once the setting above them is on.

Still not sure which setting you need? Contact the Helm support team with a screenshot of the pane you are working in.